Site
Navigation -
RCF
AM7000 Series AM7030N
- AM7060N -
AM7120N Table
top mixer amplifier, was produced
in 3 power sizes, 120 watt, 60
watt and 30 watt. Optional
Priority Board A 1701Code no.
123.20.017 Optional
Chime Board A 1705 Code no.
123.20.021 E&OE TEL:
01245 361578
with 4 universal inputs that
could be used for microphone
(balanced/unbalanced) or for high
level sources. Independent level
controls for each of the 4
inputs.
Also a PA/HF filter switch, bass
and treble controls for overall
function.
In addition, input 4 could be set
with RIAA eq allowing connection
of magnetic cartridge record
players.
An LED display provides VU meter
function.
Specifications:
for all
models:
Frequency response - 80
-12000Hz
Signal to Noise Ratio - micro
³60dB / high level ³90dB
Input Sens /Imp - 4 micro DIN /
0.8mV - 2K
Input Sens /Imp - 4 high level
DIN 40mV - 22K
1 phono DIN / 2.5mV - 47K
1 tape DIN / 80mV - 12k
Outputs - 4 , 8 , 16ohm
Outputs - 50, 70, 100v
Slave out - 1 tape DIN / 100mV -
2k2
Power supply - 120/240v ac only
90vA (30w) 270vA(60w)
320vA(120w)
Dimensions - LxHxW = 336 x 116 x
225mm
The
A 1701 board, available as an
optional accessory for the AM
7030/N, AM 7060/N, AM 7120/N
amplifiers,makes it possible to
set universal inputs 1, 2, 3, and
4 with the graduated priority
function (input 1 with priority
over 2-3-4, input 2 with priority
over 3-4, etc.). This function is
usually required when two or more
universal inputs are used as
microphone inputs. It is
recommended for use with the BM
3072 micro- phone base (Code no.
143.20.130), which is
factory-fitted for controlling
the A 1701.
The
A 1705 accessory board makes it
possible to transmit a two-tone
pre-announcement signal (chime).
The A 1705 can be used with the
7000 series amplifiers (excluding
AM 7028), 2000 series amplifiers,
E.LI.S.A. tuner-cassette decks,
and the PR 2000 preamplifier. A
single multi-pin connector makes
the board easy to install. The
output level can be adjusted by
means of a trimmer. It is
recommended for use with the BM
3072 microphone stand (Code no.
143.20.130), which is factory
fitted for controlling the A
1705.
