|
www.audio-workshop.co.uk |
PRODUCT INFORMATION |
AKG C 562 BL |
||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The C 562 BL offers the
inherent advantages of boundary layer design: up to 6 dB
higher sensitivity and virtual elimination of comb-filter
effects when installed on reflective surfaces plus extended
and flattened frequency response. The microphone is
omnidirectional in its hemisphere and essentially
insensitive to structurally transmitted noise. A
high-sensitivity electret condenser capsule provides
superior S/N ratio and extended depth coverage. |
||||||||||||||||||||||
|
The transducer element in the C 562 BL is mounted in the center of a heavy 160 mm (6.3 ") diameter plate, ideal for tabletop or floor placement. Three perimeter holes are provided for permanent installation, each with rubber mounts for shock isolation. A steel-reinforced cable terminates in a preamp / phantom power adapter with electronically balanced output via an XLR connector. A windscreen is included. |
|
|||||||||||||||||||||
|
TECHNICAL INFORMATION |
||||||||||||||||||||||
|
FREQUENCY
RANGE 20 Hz to 20
kHz POLAR
PATTERN hemispherical SENSITIVITY 20 mV/Pa (-34
dBV) EQUIVALENT NOISE
LEVEL 16 dB-A MAXIMUM
SPL FOR 0.5% THD 130
dB BASS CUT
FILTER 12 dB/octave below
150 Hz IMPEDANCE
600 ohms SIZE 160 Ø x 9 mm
(6.3 Ø x 0.35 in.) WEIGHT 950/1900 g (2.1/4.2
Ibs.) |
||||||||||||||||||||||
 |
||||||||||||||||||||||
|
E&OE 2006 |
||||||||||||||||||||||
